Peel Safe Game Line Tape

Installation Information Sheet

Use:
Peel Safe Game Line Tape is intended for use on hardwood floors only.

Prep:
Hardwood floor should be cleaned before applying tape. Make sure all dirt, grease, and foreign spots are removed.
Floor must be completely dry before applying tape.

Application:
Remove clear backing from tape and apply on floor where desired.
Use a felt tip squeegee or run your hand over tape to ensure adhesion. Make sure no bubbles are under tape.
If you find a bubble or other problem, pull tape up (see removal process) and reapply.

Removal:
Begin peeling Peel Safe Tape at a corner. Slowly remove Peel Safe Game Line Tape keeping tension as you pull.

Other Important Information:
Three-point lines – install a guideline just under the size of the normal three-point line. Install peel safe game line tape by slowly stretching and applying the line using the guideline, make sure there are no wrinkles. If the tape wants to wrinkle pull it back up and pull/stretch it until you can bend it around without getting wrinkles. If you allow wrinkles in the tape, it will allow dirt to get under the tape and cause the tape to come loose.

2” Peel Safe Game Line Tape is not recommended for small circle.
If a small circle is needed use 1” Peel Safe Game Line Tape or dashes.